This is an automatic marking machine, equipped with two loading stations, loading about 350 pieces at a time, and automatically switch to another loading station when one loading station runs out; the automatic marking machine operates in fully automatic mode, single-piece cycle time of 10 seconds, very efficient; suitable for a variety of materials; simple operation, easy to learn; equipped with 100,000 hours of laser generator, long working life.
| Type | MLM-0430F |
| Profile | 1140*1128*1648mm |
| Weight | 400KG |
| Power | 30W |
| Wave length | 1064nm |
| Laser Beam M2 | ＜1.8 mm |
| Frequency Q | 20kHz-200kHz |
| Mark depth | 110x110mm |
| Optional scope | 150x150mm |
| Mark depth | ≤0.3mm |
| Overall power | 800W |
| Min line width | 0.01mm |
| Repeatability | 0.001mm |
| Power supply | Single phase 220V 50Hz 10A |
| Marking speed | 800mm/s(Single line 1mm hight) |
| Cooling system | Air cooling & blow dust |
| Size range | All sizes |
| Material suitable | All kinds of material |
1. Deployed with two load stations, Max load 350 pieces in one process. Robot will automatically switch to another station once the first station run out;
2. Work mode fully automatic, cycle time is around 10 seconds very productive; the fully automatic winding machine shares this high-efficiency automation design in gasket production.
3. The automatic marking machine is equipped with fiber laser source with 100,000 working hours;
4. Very economic and cost effective, and very easy to learn and operate; steel strips, bearings, lead frame and plastics marking, etc;
5. Widely used for hardware, gaskets and seals, PCB, electronic parts, chips, auto parts, steel strips, bearings, lead frame and plastics marking, etc.
