This is a machine that produces large-size kammprofile, with a processing range of 450mm-3500mm in diameter; the thickness of the workpiece is 3mm-5mm; the maximum width of the workpiece is 60mm; PLC program control, with high control accuracy; the servo motor controls the tool feed, and the product consistency is good; the operation is simple; after replacing the cutter head, it can also process the guide ring milling groove and the inner ring chamfer; the machine is stable.
| Type | MK-03 |
| Machine Profile | 4250*3700*1500mm |
| Weight | 660 KG |
| Power supply | 4.5 KW |
| Voltage | 3 phase 380V,variable |
| Process control | Numberical control system & PLC programmed |
| Servo motor | Servo motor control cut |
| Size range | 450mm - 3500mm |
| Material allowed | Stainless steel, Carbon steel, Alloy |
| Thickness | 3mm-5mm |
| Flange width maximum | 60mm |
| Multiple function | Camprofile groove chamfer |
| Cycle time | 5 minutes (630mm) |
| Setup or size change time | 2-10 minutes |
| Ring load & Unload | Manually |
| Grooving process | One by one |
| Groove and Chemferring | Yes |
| Turning speed | 80-120 m/minute,adjustable |
| Driving mode | Two driving wheels |
| Cooling mode | Vortex Cooler |
| Air Consumption | 0.8 m³/min |
1. Make large sizes of kamprofile gasket, from 400mm up to 3500mm;
2. Very high productivity, use 630mm flange width Camprofile as example, cycle time is less than 5 minutes.
3. The kammprofile machine features CNC controlled process, servo motor driven cutter, fully automatic cut, make very precise and quality kamprofile;
4. Compressed air cool down the cutter, and blow away the scrap;
5. By changing the cutter, machine can also performing as a grooving or chamfering machine.
6. Pre-installed 6 programs, so the operator can quick set by selecting a program.
