|3 phase 380 V
|750 W Servo motor
|ASME standard 1/2"to 6"
|Basic & inner ring type
|20 seconds for 3"
|Change over time
|From 5 to 10 minutes
|Basic type / Both type
|Inner ring loading
|Manual / Automatic
|No / 150 pieces
|Save 500 sets
|Filler break sensor
|Strip feeding & cut
|Filler feeding & cut
|Filler load capacity
|Filler pancake shift
|Flange width measuring
|Yes, one charge 15 kg
MV-01A Fully automatic winding machine main features：
1.This machine can make both basic type and inner type of gasket, under process making basic type, machine can run fully automatically. Under process making inner ring type of gasket, all need to do is underloading rings and unload windings as it finished.
2.Use PLC programmed process control, and servo motor as driver, precisely control the whole winding process.
3.Build in strip former, use flat strip on bobbin with motor driven uncoil.
4.Build with a welding robot, make all welding points reliable and even
5.Deployed an automatic flange width measuring device, make gasket OD very accurate, and you can choose having a strip tail or welding to the end, e.g without tail of strip.
6.With large memory storage, can save over 500 sets of parameter settings for different sizes and press classes. Each type of gaskets will be given a product code, whenever you want to make it, you only need to change the product code, then all parameter settings for this type will be ready to produce, save time from repeative parameter setting.
7.Build with steel strip automatic feeding and automatic cutting off.
8.Build with graphite tape automatic feeding and automatic cutting off.
9.Build in graphite detector, the machine will automatically stop in any cases such as graphite break or run out.
10.The most controlling electronic components such as PLC, relay are all high quality international brands. This gaurantee the machine’s relieability and productivity.