MH-02 Horizontal Winding Machine

TypeMH-02
Machine profile1100*950*1750mm
Voltage3 phase 380 V
Drive motor1.1 KW
Driving powerVariable frenquency motor
Working modeSemi automatic
Size10" up to 4000mm
Filler MaterialMultiple filler material
Gaskets typeStandard and inner ring gasket
StandardsAll standards
Cycle time5 minutes for a 24" gasket
Change over time5 to 10 minutes
Process controlProgrammed by PLC
Material feed and cut offManually
Automatic WelderYes
Filler break controlYes
Steel form assistantYes
Steel formerYes
Flange width measuringYes
Steel spool supportLoad up to 15 kg strip
Filler Plate supportLoad over 6-8 pancakes

MH-02 Horizontal winding machine:

1.Making big size of gaskets (10" to 4000mm) and having the flexibility of making standard and inner ring gasket.

2.Automatic welding saves great deal of working time, moreover, makes welding points strong and reliable, and welding span even. One switch shift between automatic and manual welding.

3.Automatic dimensional control, make production more efficient.

4.Filler material break sensor, machine stop when the filler break or run out.

5.One charge can load 15 to 20 kg wire, saves a lot of working time, especially on making big size gaskets.

6.Wire forming and winding synchronize, save one step of wire pre-forming compare to the old generation of machine.

7.Wire form assistant, which easies tension of wire, make perfect flat gasket no meter how wide of the flange.

8.One charge can load 15 to 20 rolls of graphite, with height adjustable graphite holder.

9. Successfully use man-machine engineering principle, layout all often use operation within arm-reach area, makes operator’s work easier.



If you are interested in our products, please click on the right to contact us!